Termékek doboz doboz dobozok (61)

KAPPE / DECKEL (2) SELBSTKLEBENDES ETIKETT (3) OFFSETDRUCK (4) DIGITALDRUCK (5) HÜLSE (6) MALEREI BOX (8) KUNSTSTOFFFREI SEKUNDÄRVERPACKUNG (9) KUNSTSTOFFFREI BAND

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box. Productivity max:840 pieces/hour Box transfer speed:about 22 m/min Compressed air supply:6 Bar, 13 Nl per cycle Working plan height:mm 650 + 30 Charger capacity:110/120 boxes

Scatola regalo in cartone ondulato di alta qualità per vasi miele da 1 kg. FORMATI DISPONIBILI: Vasetto da 1 kg singolo. Vasetto da 1 kg doppio. Codice Prodotto:410

AUTOMATIC CASE ERECTORS Semi-automatic carton erector for closing the bottom flaps of the box Max. sixe mm. 520x520x700 or mm 670x670x800. The Pack Point is a case erector that, assisted by an operator, automatically folds the four bottom flaps of an American box. In few seconds the carton is ready for the operator to fill: while holding the case, Pack Point allows the operator to use both hands for placing the product into the carton. When the carton is filled, the operator presses a button and the PP automatically transfers the carton into a case sealer for top and bottom sealing. The Pack Point can be linked to a Gem 520/670 (bottom taper) so that boxes can be easily sent to filling lines by motorized conveyors. The machine is equipped with 4 wheels with brakes. Example model:PACKPOINT 520 Box size:Length from 150 to 700 mm Width from 110 to 520 mm Height from 120 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:4 bar Air consumption:13 nl/min Work surface height:650 mm

PACK POINT 08 - CASE ERECTOR Semiautomatic carton erector. It forms the bottom of uniform size batches of American type boxes, with operator. Operation is simple , just insert the open box in the case erector. The four bottom flaps are folded and the box is automatically locked in position for filling. A pneumatic pusher makes the expulsion of the box to a taping machine . The PACK POINT 08 when combined with a taping machine is a compact and productive semi-automatic packaging line. The machine is equipped with 4 wheels with brakes. Box Size:Length from 180 to 650 mm Box Size:Width from 140 to 520 mm Box Size:Height from 100 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:5 bar Consumption per cycle:7,5 nl Work surface height:650 mm

Combining the erector to a line (taping base, filling floor and taping machine) it is possible to create the boxes as they need, without engaging spaces for accumulation. The trainer will automatically form boxes, taking them from the side stock and by bending the four bottom flaps. The settings relating to boxes, speed size etc .. are all adjustable by a convenient front panel. The operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F2000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box. Productivity max:840 pieces/hour Charger capacity:110/120 boxes Compressed air supply:6 Bar, 13 Nl per cycle Working plan height:mm. 650 + 30

JUMBO pneumatic stapler model for cardboard boxes with double and triple wave with thickness up to 25 mm. It use coppery staples type 32J width mm. 32 x length mm. 25-28-32-35-38, packs of 1000 pieces. Point usedwidth:mm 32 x lenght mm.25-28-32-35-38 Storage capacity:100 points Compressed air pressure:5-7 bar Air Consumption:0,067 m3/min High speed:2 points per sec

PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve. Total length (mm):935 Total width (mm):950 Maximum box width (mm):650 Minimum box width (mm):160 (on request 120 mm) Minimum box height (mm):75 Conveyor rollers width (mm):780 Conveyor roller diameter (mm):48 Feed speed (m/min):15 Installed power (kW):0.37 Maximum load (Kg):50

AIR BOXER pneumatic stapler for fast and efficient stitching. Used mainly for the closure of the upper part of the boxes. Pneumatic stapler models available in 5/8 - 3/4 - 7/8, for staples auburn mm. 35/15 - 35/19 - 35/22 in the finger. Equipped with a device for adjusting the depth of the stitching. Magazine capacity:100 staples Usable staples:mm 35/15 - 35/19 - 35/22 and 32/15-32/19 (depend on the model) Air pressure:4-6 atm

Scatola regalo in cartone ondulato di alta qualità per vasetti miele da 40 g monodose. FORMATI DISPONIBILI: Vasetto monodose da 40 g triplo. Vasetto monodose da 40 g quadruplo. Codice Prodotto:440

Scatola doppia onda in cartone per 12 vasi da 500 g con separatori interni in cartone. Dimensioni scatola: 25.5 cm x 33 cm x 12 cm altezza Codice Prodotto:412

Cassetta degli attrezzi in legno ideale per conservare e trasportare gli attrezzi. Dispone di diversi scomparti per la leva, l'affumicatore, le pinze, la spazzola e il supporto per i telai. L'interno della cassetta è dotato di rastrelliere per trasportare i telai cerati senza danneggiarli. Una maniglia in acciaio inossidabile consente di trasportare facilmente gli attrezzi senza rischiare di perderne durante il tragitto verso l'apiario. La cassetta degli attrezzi è il regalo ideale, sia per sé che per gli altri. Venduta senza accessori. Codice Prodotto:232 Dimensioni:255 x 345 x 500 mm

Scatola regalo in cartone ondulato di alta qualità per vasetti miele da 125 g. FORMATI DISPONIBILI: Vasetto da 125 g triplo. Vasetto da 125 g quadruplo. Codice Prodotto:433

Scatola doppia onda in cartone per 12 vasi da 250 g con separatori interni in cartone. Dimensioni scatola: 21.5 cm x 28 cm x 10.5 cm di altezza Codice Prodotto:430

Scatola regalo in cartone ondulato di alta qualità per vasi miele da 250 g. FORMATI DISPONIBILI: Vasetto da 250 g singolo. Barattolo doppio da 250 g. Vasetto da 250 g triplo. Codice Prodotto:439

Scatola doppia onda in cartone per 6 vasi da 1 kg con separatori interni in cartone. Dimensioni scatola: 21 cm x 30.5 cm x 14.5 cm altezza Codice Prodotto:411

CARTON SEALER MACHINE MOD. FP 9070 - DOUBLE DRIVE SYSTEM CONSISTS OF TWO LOWER SIDE BELTS AND TWO UPPER BELTS. Machine suitable for large boxes, the double drive system ensures a regular feed even in presence of high and light boxes. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Carton dimensions:Min 150 x 200 x 120 mm Max Unlimited x 700 x 750 mm Tape width:mm 50 (75 optional) Tape type:PP - PVC Operation speed:20 m/min Belt drive:Lower side/Upper

The pneumatic stapler ROLL is employed for the sealing the top part of cardboard boxes. It is provided with a coil magazine. The number of staples the fastener can contain is therefore quite high (1,000 for coil) and work can be accomplished in a faster way. They are equipped with the stitch depth adjustment and use points with width mm. 35 and depth mm. 15-19-22. The stapler use AR1 type staples only, characterised by their inclined shape. The tool is available in three versions in order to be able to seal cartons of any width. Usable staples:mm 35/15 - 35/19 - 35/22 Magazine capacity:1000 staples Dimensions:mm. 200 x 95 x 210 h Air pressure:6 atm

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. The model FP8022 allows to strap the product with minimum size of 60x60x10 mm and it uses strap with width 6-9-12 mm and with max thickness of 0,6 mm. Strap width:mm. 6- 9- 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:85 Kg

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Wrapping machine semi-automatic with turntable mod. FP BOX - TIRES, suitable to the winding of tires coupled with internal diameters from 300 mm to 500 mm. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The machine is equipped with the compressed air device by drive via lever valve for centering and locking of the wheels, consisting of two jaws which are installed on the expansion of extractable pins. To lock and unlock the tires is sufficient to drive the valve lever. The group expansion is raised by about 150 mm. from the plane table. Load:200 Kg Internal tyres diameter:da mm. 300 a 500 (adjustable) Turmtable diameter:Max mm. 1000 Max package dimensions:mm. 800 x 800 x 1000 h Height from the floor:mm. 700 Power:Kw 0,37 Weight:200 Kg Dimensions:1600x1000x1800 h

Semi-automatic wrapping machine mod. FP BOX with rotating table, suitable for wrapping boxes and small packages. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The standard table has the turntable completely smooth. You can request the non-slip rubber coating or different locking systems of the pack. Current promotion: The FPBOX wrapping machine for boxes is supplied with a free inverter that allows the adjustment of the rotation speed of the rotary table from 10 to 20 rpm Max load weight:200 Kg Turntable diameter:mm. 1000 Max. load size:mm. 800 x 800 x 1000 h Film roll size:manual film diam. max mm. 140 Electrical supply:220 V. 50 Hz Installed power:Kw 0,37 Weight:200 Kg machine size :1600x1000x1800 h

Multifunction scales with fully stainless steel structure with degree of protection IP65, suitable for being used in humid environments. Equipped with waterproof keyboard immune to dust and splashes with diplay 18 mm LCD backlit 4-digit legible. The weighing plate measuring 210x210 mm and is easily washable. Power is supplied via external network power supply included or rechargeable batteries (not included). Weight about 3 kg. FUNCTIONS AVAILABLE: Tare M + weighted summation Total weighted MR Units External calibration AutoFF Signal Low Battery Example model:FPAGS6 Load :6 kg Standard division :0,2 g Division CE-M:2 g Dimensions :mm. 310x220x75h Autonomy:100 hours (80 with backlight)

Extendable roller conveyors with plastic wheels and galvanized steel pantograph structure for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase. Extendable roller :Plastic rollers with ball bearings Bearing structure :Galvanized steel Supports (STD) :Adjustable in height da mm. 650 a 900 Wheels :In rubber with diameter mm. 80 with brake Roller type :2 modules - minimum length 1000 - maximum length 3000 - 3 supports Roller type:3 modules - minimum length 1400 - maximum length 4500 - 4 supports Roller type:4 modules - minimum length 1800 - maximum length 6000 - 5 supports Roller type:5 modules - minimum length 2200 - maximum length 7500 - 6 supports Roller type:6 modules - minimum length 2600 - maximum length 9000 - 7 supports Orderable width (mm):500 - 650 - 800 Capacity (Kg/mt) :30

GEM F470 - F520 - F670 CARTON SEALERS WITH MANUAL ADJUSTMENT - AUTOMATIC FLAP CLOSER AND SIDE DRIVE BELTS Carton sealer with manual dimensioning and and automatic flap closer. It folds automatically the four upper flaps and seals with auto-adhesive tape the top and bottom of batches of uniform size, American-type boxes. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing. Example model:GEM F470 Boxes width min:mm 100 Boxes width max:mm 520 Boxes lenght min:mm 150 Boxes lenght max:mm 600 Boxes eight min:mm 100 Boxes eight max:mm 670 Tape width:mm 50 (75 option) Operation speed:22 m/min Compressed air:6 Bar Air consumption:2,5 Nl

Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries. Example model:BIG 100/150 INOX Load:100 Kg Lifting height:1500 mm Riser height:1920 mm Batteries:2x12 V/ 40 Ah Dimensions:560x1000x1950 mm

Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device. Staples width:35 mm Charger capacity:100 staples Usable staples:35/15-35/19 mm Weight:Kg. 1,200

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator. Strap width:mm. 9-12 Strap thickness:mm. 0,5-0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:307 Kg

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1000 mm height:mm. 1000 working height:650 mm Weight:125 kg Belt Drive:left and right

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products Table top diameter:mm. 800-1000-1200-1400 Variable speed:from 4 to 9 rpm/min Installed power:Kw. 0,18 Power supply:380V three-phase Standard height of the top with adjustable feet :mm. 810 (+/- 40 mm)